Cocoa Bean Peeler Machine Coffee Bean Peeling Machine

• After-sales Service: Professional After-Sales Engineer
• Warranty: 1 Year
• Voltage: 380V
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Cocoa Bean Sheller
• Structure: Vertical
• Application: Coffee Bean
• Weight: 80/140kg
• Dimension(L*W*H): 600*550*1100
• Material: Carbon Steel/Ss104/SS316
• Capacity: 200-400kg/H
• Motor: 0.75kw
• Threshing Rate: 99.3%
• Breaking Rate: 0.5%
• Operator: One Person
• Transport Package: Wooden Packing
• Trademark: PINYANG
• Origin: China
• HS Code: 8437800000
• Production Capacity: 1000sets/Year
• Package Size: 60.00cm * 55.00cm * 110.00cm
• Package Gross Weight: 80.000kg

Product Description

Product Description

Working principle and product characteristics: The machine's nuts can be peeled without using soaking water. The peeling rate is above 95%, and the nuts and peels are automatically separated. It has the features of automatic feeding, peeling, discharging, and automatic operation in a short time, and is practical, power saving, small in size, high in production efficiency, easy to maintain and clean, and low in failure rate. The vacuum cleaner can suck off the red coat and process it into ideal half-grain pieces.
 

Specification

 

Model	output(kg/h)	power(kw)	fan power(kw)	peeling rate	size(mm)	weight(kg)
PY-200	200	0.75	0.37	99%	600*550*1100	80
PY-400	400	1.5	0.37	99%	1200*1100*1180	140

Product Parameters

How to operate the machine:

1. Before the operation is started, check whether the transmission parts are loose and eliminate any abnormal noise in time. 2. After checking normal, turn on the fan first, then turn on the rubbing roller. The opposite is true when shutting down. 3, before rubbing the raw materials, you must first bake a little or bake it, just rub the skin with your fingers. 4. Start the suction fan, adjust the size of the air intake door according to the wind force, and suck off the thin skin without sucking the nuts. 5. The size of the raw material particles is different. The size of the half gap must also be adjusted at any time. The larger the particle size of the raw material, the larger the gap, and vice versa. Generally it is 1 mm smaller than the flat direction of the bean, for reference. 6. There are two adjusting handles on the front of the roller to control the adjusting gap. The forward rotating gap is large and the reverse rotating gap is small. 7. Try rubbing with a small amount of raw materials first, and then see the effect of rubbing the flaps before adjusting the gap. 8. After a period of time, regularly check whether the transmission parts and circuits are intact and remove the dirt in time to avoid affecting the normal use.
 

Packaging & Shipping

Company Profile